Fluorine-intercalated carbon fibers-I. structural and transport properties

The intercalation of fluorine in various types of carbon fibers (PAN-based or pitch-based, asreceived or high-temperature treated) has been investigated at room temperature in the presence of gaseous HF. Stage-1 compounds with C_2.5F to C₄F compositions are obtained for 10 bar F₂ pressures, whereas lower pressures (1 bar F₂) lead to stage-2 compounds. Although in higher stages (≥2) the electrical conductivity is generally larger than in the pristine fiber, in stage-1 compounds a drastic increase of resistivity is observed, ρ being more than one order of magnitude larger than that of the starting material. Finally, fluorine-intercalated GICs have been found appropriate to investigate the effects of disorder and reduced dimensionality.     

Studies on bitumen production from North Rumaila crude oil

In the present investigation, the effect of three process variables viz., air rate, temperature and time of oxidation has been studied to determine the possibility of making paving bitumens from North Rumaila Crude Oil. In order to have flexibility in the choice of proper feedstock for bitumen production, the effect of these process parameters was studied on three different vacuum residues. Air rate and temperature of oxidation were optimised to produce a bitumen product having less temperature susceptibility. The composition studies of typical feeds and oxidised products indicate that mainly “saturates” components get converted to “asphaltics” on air blowing.     

Sample modulated Raman spectroscopy and frequency modulated visible light--resonance Raman spectrum of a polydiacetylene fiber

Methods for obtaining sample modulated Raman (SMR) spectra and frequency modulated visible light are described. The sample modulated Raman method is one in which the frequency of the Raman scattered light is modulated by the sample which is responding to an externally applied periodic stress. The Raman active modes of the sample which are due to the vibrational motion of those molecular-scale units that change in response to the external stress are modulated and appear in the frequency-locked phase sensitively detected Raman spectrum. Those modes due to units that do not respond significantly to the stress do not appear. In principle the SMR method permits determination of those molecular units of a complex substance that are responsible for the substance's response to an external stress. The Raman scattered light is frequency modulated, has the wave form nu=nu(0)-nu(i)-(deltanu) sin(2pi ft), where nu(0) is the incident monochromatic light, nu(i) is the vibrational frequency of the statically stressed material, and (deltanu) is the magnitude of the frequency shift caused by the maximum stress applied at the frequency f.     

Effects of surface treatment on the mechanical properties of carbon fibers

Surface of the carbon fibers developed from PAN (polyacrylonitrile) has been modified using such methods as air oxidation, nitric acid treatment, and anodic (electrolytic) oxidation. By choosing optimum treatment parameters, the tensile strength of such fibers has been found to increase by about 60 percent over that of the untreated value. A quantitative estimation of the surface groups formed during the treatment shows an increase in number with severity of the treatment. Further, removal of these functional groups from the fiber surface during degassing at 1000°C also influences the mechanical properties of the carbon fibers considerably. Results have been discussed in detail.     

Mobility modeling, location tracking, and trajectory prediction inwireless ATM networks

Wireless ATM networks require efficient mobility management to cope with frequent mobile handoff and rerouting of connections. Although much attention has been given in the literature to network architecture design to support wide-area mobility in public ATM networks, little has been done to the important issue of user mobility estimation and prediction to improve the connection reliability and bandwidth efficiency of the underlying system architecture. This paper treats the problem by developing a hierarchical user mobility model that closely represents the movement behavior of a mobile user, and that, when used with appropriate pattern matching and Kalman filtering techniques, yields an accurate location prediction algorithm, HLP, or hierarchical location prediction, which provides necessary information for advance resource reservation and advance optimal route establishment in wireless ATM networks     

Bimodification of polyacrylonitrile (PAN) fibers

A new technique for the modification of PAN fibers has evolved, in which the starting precursor material is impregnated with an aliphatic carboxylic acid, as well as KMnO₄. The bimodification of PAN, attempted by us for the first time, is aimed at achieving dual advantages in plasticization effect, as well as in a catalytic effect in a single treatment. The unmodified, unimodified, and bimodified precursors have been characterized for their mechanical, thermal, and physical behavior during various stages of processing to carbon fibers. These results are discussed in detail. The study further shows an 18% improvement in the mechanical properties of carbon fibers, prepared from bimodified precursor, as compared to that of unmodified precursor. One of the reasons for such improvement is the lowering in diameter of PAN fibers and in the resulting carbon fibers. © 1993 John Wiley & Sons, Inc.     

Constructing candidate word lists using acoustically similar wordgroups

A method for identifying a set of candidate words that matches well with a given utterance is discussed. The method uses precomputed groups of acoustically similar words. Given a vocabulary, for each word a short list of words that are acoustically similar to it is computed. These groups are constructed using training utterances recorded by several speakers and used in an isolated utterance recognition system to construct candidate word lists during recognition. Experiments show that the correct word appears on the short list of candidate words constructed during recognition using this scheme over 98% of the time